Toshiba MW27F51 Service Manual - Page 8
Tape Removal Method At No Power Supply, Disc Removal Method At No Power Supply
View all Toshiba MW27F51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
TAPE REMOVAL METHOD AT NO POWER SUPPLY 1. Remove the TV/DVD/VCR block from the main unit as shown in Fig. 1 below can be seen. (Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.) 2. Remove the screw 1 of the Deck Chassis and remove the Loading Motor. 3. Rotate the Pinch Roller Cam in the direction of the arrow by hand to slacken the Video Tape. (Refer to Fig. 2) 4. Rotate the Clutch Ass'y either direction to wind the Video Tape in the Cassette Case. 5. Repeat steps 3~4. Then take out the Video Cassette from the Deck Chassis. Be careful not to scratch the tape. Loading Motor Screw 1 Pinch Roller Cam Capstan DD Unit Fig. 1 Main Cam Clutch Ass'y Main Chassis (Front Side) Fig. 2 DISC REMOVAL METHOD AT NO POWER SUPPLY 1. Remove the Back Cabinet and TV/DVD/VCR Block. (Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.) 2. Rotate the Main Gear in the direction of the arrow by hand. (Refer to Fig. 1) 3. Manually open the Tray. Main Gear DVD Deck Fig. 1 A1-7