Toshiba Qosmio G35-AV660 User Guide - Page 235
Enter, Sample Image Toshiba Recovery DVD RAID Menu
View all Toshiba Qosmio G35-AV660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 235 highlights
235 Using the TOSHIBA RAID Utility Creating a new RAID-0 array 4 Press the right arrow key until the CD icon is highlighted; then, press Enter. The following menu is displayed: Your machine supports Redundant Array of Independent Disks (RAID). Please select the RAID level. 1. Factory Default Setup the computer ready to support mirroring function. You can use RAID Utility to configure two hard disks to become mirror of each other, in which the same data is written on both hard disks. If one hard disk fails, the system can still run from the other hard disk. Before using RAID Utility, your second hard disk can still work as independent hard disk. Advance Setting (for Advance users only) 2. RAID-1 - Automatically configure two hard disks of your computer to become mirror after recovery process is completed. WARNING: You can not use the second hard disk for any other purpose until you use RAID Utility to end mirroring. 3. RAID-0 - Automatically configure computer to support striping function - data is broken into blocks and written to both hard disks simultaneously to increase the hard disk performance. WARNING: IF ONE HARD DISK FAILS, ALL DATA IS LOST. Enter selection:" (Sample Image) Toshiba Recovery DVD RAID Menu 5 Press 3 and then press Enter to select RAID-0. NOTE RAID-1 configuration can vary in time to complete, depending on the size of the hard drives and the amount of data.