Toshiba Qosmio G35-AV660 User Guide - Page 318
A PC Card error occurs., Hot swapping removing one PC Card and inserting
View all Toshiba Qosmio G35-AV660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 318 highlights
318 If Something Goes Wrong Resolving a hardware conflict own I/O base address. See "Fixing a problem with Device Manager" on page 304 for more information. Since all PC Cards share the same socket, each card is not required to have its own address. Hot swapping (removing one PC Card and inserting another without turning the computer off) fails. Follow this procedure before you remove a PC Card: 1 Double-click the Safely Remove Hardware icon on the System tray. 2 Select the item you wish to remove. 3 Click Stop. 4 Remove the device when prompted to do so. 5 Click OK three times to close the Safely Remove Hardware screen. Never swap modules when the computer is in Hibernation or Standby mode. This is known as "warm swapping" and is not supported with this computer. For more information on Hibernation and Standby modes see "Hibernation mode" on page 82 and "Standby mode" on page 83. The system does not recognize your PC Card. Refer to the PC Card documentation. Removing a malfunctioning card and reinstalling it can correct many problems. A PC Card error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the card's documentation, which should contain a troubleshooting section.