Toshiba SD-4205N Owners Manual - Page 18

Connecting to an audio system and TV equipped with ColorStream® (Component video) inputs Signal flow Connections Y 2CH L PB PR S VIDEO OUT VIDEO COAXIAL OPTICAL BITSTREAM/PCM AUDIO OUT AUDIO OUT 5.1CH SURROUND FRONT SURROUND CENTER R SUBWOOFER AC IN (red) (white) To Y To PB To PR VIDEO VIDEO VIDEO OUT OUT OUT To 2CH AUDIO OUT (white) To wall outlet To Y video input To PB (CB) video input To PR (CR) video input To audio inputs of the amplifier (red) Audio system TV or monitor with component video inputs ColorStream® (Component video) outputs/inputs Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy higher quality picture playback. Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR) In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance. • Make the following setting. On-screen display Select: Page 54 "Audio Out Select" "Analog 2ch" 57 Notes • Refer to the owner's manual of the connected equipment as well. • When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. • If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD video player away from the tuner and radio. • The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. • Turn off the amplifier before you connect or disconnect the DVD video player's power cord. If you leave the amplifier power on, the speakers may be damaged. 19