Toshiba Tecra A8 Maintenance Manual - Page 235
Disabled, Enabled, English, French, Setup by OS, All Devices - remove bios password
View all Toshiba Tecra A8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 235 highlights
3.30 SETUP 3 Tests and Diagnostics NOTE: 1. Do not remove the AC adapter and battery pack at the same time when you use this feature. If you do so, data saved by the resume function will be lost. You must also reset this option. 2. When a password is set in Password Security, the system is in standby mode, the Timer on function (Auto Power PN) is set and the system is booted, "Password =" is displayed. When the password set in Password Security is input, the computer returns to Windows from standby mode. 3. This function is effective only once, it is released after booting up. (f) Beep Volume This option selects the volume of beep (Warning). "OFF", "Low", "Medium" (Default) or "High" can be selected. If a memory module that does not comply with the standards, the computer beeps at maximum volume. (g) Diagnostic Mode This option sets whether the BIOS Setup Diagnostic test is enabled. Disabled Enabled The Diagnostic test is disabled. (Default) The Diagnostic test is enabled. (h) Language During Bootup This option selects the language during bootup. This message appears only on the model for TCL (Canada). English The message is displayed in English. (Default) French The message is displayed in French. 8. Configuration This option displays the configuration method. (a) Device Config. The devices are initialized when the PNP OS loads. Setup by OS Initializes devices, which is needed to load an operating system. Operating system initializes other devices. (Default) All Devices All devices will be initialized. If you are using an OS that does not have PNP capacity, select "All Devices." The Display shows the following message: Device Config. = All Devices TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573) [CONFIDENTIAL] 3-101