Toshiba Tecra A8 Maintenance Manual - Page 268

4 Replacement Procedures 4.8 Optical drive 4.8 Optical drive Removing the Optical drive To remove the optical drive, follow the steps below and refer to Figure 4-12 and 4-13. CAUTION: Do not put fingers inside the optical drive. It may cause injury. 1. Turn over the computer and remove the following screw securing the optical drive. • M2.5×6B FLAT HEAD screw ×1 2. Turn over the computer and open the display. 3. Peel off the insulator and remove the optical drive from the connector on the system board while pushing it in the direction of the arrow in the figure below. M2.5×6B FLAT HEAD Insulator Optical drive (In the slot) Figure 4-12 Removing the optical drive 4-22 [CONFIDENTIAL] TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)