Toshiba Tecra A8 Maintenance Manual - Page 287
Serial/S-Video board
View all Toshiba Tecra A8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 287 highlights
4.16 Serial/S-Video board 4 Replacement Procedures 4.16 Serial/S-Video board Removing the Serial/S-Video board To remove the serial/s-video board, follow the steps below and refer to Figure 4-25. 1. Remove the following screw and serial/s-video board. • M2.5×6C Tapping screw ×1 2. Disconnect the serial/s-video board cable from the connector CN9600 on the system board and CN9610 on the serial/s-video board. M2.5×6C Tapping CN9610 (on the back of the Serial/s-video board) Serial/s-video board Serial/s-video board cable CN9600 (on the back of the system board) Figure 4-25 Removing the serial/s-video board Installing the Serial/S-Video board To install the serial/s-video board, follow the steps below and refer to Figure 4-25. 1. Connect the serial/s-video board cable to the connector CN9600 on the system board and CN9610 on the serial/s-video board. 2. Install the serial/s-video board to the slot of the base assembly and secure it with the following screw. • M2.5×6C Tapping screw ×1 TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573) [CONFIDENTIAL] 4-41