Toshiba Tecra A8 Maintenance Manual - Page 261
Installing the HDD
View all Toshiba Tecra A8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 261 highlights
4.5 HDD 4 Replacement Procedures Installing the HDD To install the HDD, follow the steps below and refer to Figure 4-5 to 4-7. CAUTION: Do not hold the HDD by its top and bottom flat surfaces. It may damage the HDD. 1. Install the HDD to the HDD Holder and secure them with the following screws. • M3×4C FLAT HEAD screw ×4 CAUTION: Do not apply pressure to the center of the HDD assembly. It may damage the HDD assembly. Hold the HDD assembly by its corners. 2. Set the connector of the HDD cable upward and connect the HDD assembly to the connector of the HDD cable. Lay the HDD assembly down in the slot. 3. Install the HDD cover and secure it with the following screws. • M2.5×10B FLAT HEAD screw ×2 TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573) [CONFIDENTIAL] 4-15