Uniden BCD996P2 English Manual - Page 69
The ETA Estimated Time for Arrival to the selected POI.
View all Uniden BCD996P2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
The 1st line displays the latitude of the current location. The 2nd line displays the longitude of the current location. The 3rd line displays "OFF" (when a POI is not selected) or the name of the selected POI. The large arrow shows the direction to the selected POI. The left side of the 1st line displays the current direction of travel. The 2nd line displays the distance to the selected POI. The 3rd line displays the name of the selected POI. The right side of the 1st line displays: • The ETA (Estimated Time for Arrival) to the selected POI. • The present time. • The elevation of the current location. • The current speed. While in GPS Display Mode To Program the Current Location : 1. Press and hold GPS for 2 seconds. 2. To Select a POI turn the scroll control. 3. To Toggle through the POI Display Modes press then 6(DISP) (each time). Note: If no programmed location is displayed ('OFF' in the display), you will only be able to toggle 'Data Display' and the (current) 'Location Display'. To Temporarily Lock Out an Alert press L/O or turn . The scanner automatically unlocks the locked out location when it moves 4 miles or more from the alert point. Quickly pressing L/O press twice permanently locks out the alert and it will not be activated again if you should go near that alert point. 1. To Toggle 'Hold' mode on a background SCAN/SEARCH press HOLD. 2. To Return to Scan mode press SCAN/SEARCH. 3. Press GPS again to view GPS Display Mode. 65