ViewSonic PJD8353s PJD8353S, PJD8653WS User Guide (English)
ViewSonic PJD8353s Manual
 |
View all ViewSonic PJD8353s manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic PJD8353s manual content summary:
- ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 1
PJD8653ws/PJD8353s DLP Projector User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 2
may cause undesired operation. This equipment has been tested and found to comply with the limits for a and used in accordance with the instructions, may cause harmful interference to radio with Canadian ICES-003. yy Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 3
ventilation openings. Install the unit in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 4
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/ EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 5
of the display. For additional information, please see the "Customer Support" section in this guide. Product Name: Model Number: Document Number: Serial Number: Purchase Date: For Your Records PJD8653ws/PJD8353s ViewSonic DLP Projector VS14956/VS14991 PJD8653ws/PJD8353s_UG_ENG Rev. 1A 01-17-13 - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 6
Cord must meet the requirement of countries where you use this projector. Please confirm your AC plug type with the graphics below Power Cord does not match your AC outlet, please contact your sales dealer. This projector is equipped with a grounding type AC line plug. Please ensure that your outlet - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 7
36 3D 37 Interactive 38 LAN 39 Timer 40 Web Management 41 Appendices 48 Troubleshooting 48 Image Problems 48 Projector Problems 51 Remote Control Problems 51 Sound Problems 51 3D Problems 51 On Screen Messages 52 Compatibility Modes 53 Replacing the lamp 57 Replacing and - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 8
below are in the box. If something is missing, please contact our customer service. AAA AAA Projector with lens cap Remote Control AAA Batteries x 2 (For remote control) AC Power Cord Documentation: yy User's Guide (DVD) yy Quick Start Card VGA Cable Due to different applications in each - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 9
Product Overview Main Unit 3 1 4 5 3 (Front View) 2 6 7 (Rear View) 8 1. Focus Ring 2. Lens 3. IR Receiver 4. Control Panel 5. Lamp Cover 9 10 (Bottom View) 6. Input / Output Connection Ports 7. Power Socket 8. Elevator Feet 9. Elevator Feet 10. Elevator Feet Spacer 8 - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 10
Control Panel 5 1 6 2 7 3 4 8 1. Power key / Power LED 2. Four directional select keys / Keystone 3. IR Receiver 4. Menu / Exit 5. Temp (Temperature) LED 6. Lamp LED 7. Enter 8. Source 9 - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 11
Connection Ports 1 2 3 4 5 6 78 LAN 9 10 11 12 13 14 15 16 17 1. Mini USB Connector 2. HDMI Connector 3. VGA Output Connector 4. LAN Connector 5. Audio In 1 Connector (For VGA In 1 Connector) 6. S-Video Connector 7. Left/Right RCA Audio Input Connector (For S-Video Connector) 8. Audio - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 12
Remote Control 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1. Power 24 2. VGA 3. Auto Sync 23 4. Enter 22 5. Four Directional Select Keys 6. My Button 7. Menu 8. Lock 9. Timer 10. Magnify +/11. Keystone / 21 12. Pattern 20 13. D.Eco 19 14. Freeze 15. Blank 18 16. Aspect 17. Mute 18. Volume +/- 17 19. - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 13
Installation Connecting to Computer/Notebook Notebook Monitor 4 9 2 4 LAN 1 2 2 3 4 5 67 8 Power socket Audio Output Computer +12V Output 1. Power Cord 2. Audio Cable * 3. VGA to DVI-A Cable * 4. VGA Cable 5. RS232 Cable * 6. HDMI Cable * 7. USB Cable * 8. - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 14
Connecting to Video Sources Video output DVD player, Set-top box, HDTV receiver 3 95 6 1 25 LAN 34 5 6 7 8 Audio Output Power socket S-Video output DVD player, Set-top box, HDTV receiver +12V Output 1. Power Cord 2. Microphone Cable * 3. Audio Cable Jack/RCA * 4. S-Video Cable * 5. - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 15
The Power LED will turn blue. 3. Turn on your source that you want to display on the screen (computer, notebook, video player, etc). The projector will detect the source automatically and will display on the screen. 4. If you connected multiple sources at the same time, press the "Source" button on - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 16
ON - 2. Make sure the environment temperature is under 40 degree C. Fan lock error, OSD showing as below: The projector will switch off automatically. 0.5 second H(On), - 0.5 second L(Off) - flashing Lamp error (Lamp, Lamp driver, Color wheel) ON - - Power LED (Blue) ON - ON ON ON 15 - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 17
Adjusting the Projected Image Adjusting the Projector's Height The projector is equipped with elevator feet for adjusting the image height. yy To raise the image: Use screw in feet to raise the image to the - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 18
Adjusting the Projector's Focus To focus the image, rotate the focus ring until the image is clear. Focus Ring Adjusting Projection Image Size Refer to the graphics and - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 19
Screen Size (4:3) Diagonal (inch) 60 70 77 80 90 mm 1524 1778 1956 2032 2286 XGA Series Projection Distance (A) Inch mm 20.6 522 24.3 617 27.0 684 28.0 712 31.6 802 Projection Distance (B) Inch mm 7.4 187 11.1 282 13.7 349 14.9 378 18.4 468 Projection Distance A(mm)= - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 20
on-screen display (OSD) / Exit a menu. Confirm a selected item. Select an input signal. 1. Use to select items or make adjustments to your selection. 2. ▲/▼act as short hot keys for Keystone +/- adjustment. Indicate the projector's lamp status. Indicate the projector's temperature status. 19 - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 21
Using the Remote Control 1 24 2 23 3 22 4 5 6 7 21 8 20 9 19 10 11 18 12 17 13 16 14 15 20 - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 22
22 Color Mode 23 Source 24 Laser Description Power on/off the projector. Switch to VGA-A/VGA-B source. Automatically synchronize the PC analog timing and out the image. Adjust image until the sides are vertical. Display test patterns. Select to operate under economic mode. Press it again to switch - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 23
"Menu" button to go back to the main menu. 5. To exit, press the "Menu" button again. The OSD menu will be closed and the projector will automatically save the new settings. Main Menu Picture Color Mode Wall Color Brightness Contrast Sharpness Saturation Hue Gamma Color Temp Color Space Bright - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 24
V. Position Digital Zoom V Keystone Ceiling Mount Language Menu Location Closed Caption VGA Out (Standby) LAN/Wireless(Standby) Auto Screen(12V out) Test Pattern Security Reset Mute Volume Microphone Volume Logo Logo Capture Auto source Input Auto Power Off (min) Lamp Setting Dynamic Black High - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 25
Main Menu 3D Sub Menu 3D 3D Invert 3D Format Interactive LAN 1080p @ 24 Interactive Settings LAN Settings 96Hz / 144Hz DHCP IP Address Subnet mask Gateway DNS Store Reset Settings AUTO / Off / On Off / On Frame Packing / Side-by-Side (Half) / Top and Bottom / Frame Sequential / Field Sequential - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 26
Picture Picture Color Mode Wall Color Brightness Contrast Sharpness Saturation Hue Gamma Color Temp Color Space Bright White Low Auto Select Enter Exit Color Mode There are many factory presets optimized for various types of images. Use the ◄ or ► button to select the item. `` Brightest: For - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 27
green in the image. `` Press the ► button to increase the amount of red in the image. "Sharpness", "Saturation" and "Hue" functions are only supported under video mode. Gamma Effects the representation of dark scenery. With greater gamma value, dark scenery will look brighter. Color Temp. Adjust the - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 28
Screen Screen Aspect Ratio Phase Clock H. Position V. Position Digital Zoom V. Keystone Ceiling Mount Auto Front Select Enter Exit Aspect Ratio `` Auto: Keep the image with original width-height ratio and maximize the image to fit native horizontal or vertical pixels. `` 4:3: The image will be - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 29
Digital Zoom Press the ◄ button to reduce the size of an image. Press the ► button to magnify an image on the projection screen. V Keystone Press the ◄ or ► button to adjust image distortion vertically. If the image looks trapezoidal, this option can help make the image rectangular. Ceiling Mount `` - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 30
Setting Setting Language Menu Location Closed Caption VGA OUT (Standby) LAN/Wireless (Standby) Auto Screen(12V Out) Test Pattern Security Reset English CC1 Off Off Off Off Select Enter Exit Language Choose the multilingual OSD menu. Press the ◄ or ► button into the sub - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 31
Auto Screen (12V Out) Choose "On", the down/up move of electronic screen will be related with power on/ off of Projector. Test Pattern Display a test pattern. Security Refer next page. Reset Choose "Yes" to return the parameters on all menus to the factory default settings. 30 - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 32
use security verification when turning on the projector. `` Off: Choose "Off" to be able to switch on the projector without password verification. Change Password `` First password is entered for 3 times, the projector will automatically shut down. `` If you have forgotten your password, please contact - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 33
Password default value is "0000" (first time). Security Enter Security Code (6 digits) Incorrect security code Re-enter again Select Enter Exit 32 - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 34
Volume Volume Mute Off Volume Microphone Volume Select Enter Exit Mute `` Choose "On" to turn mute on. `` Choose "Off" to turn mute off. Volume `` Press the ◄ button to decrease the volume. `` Press the ► button to increase the volume. Microphone Volume `` Press the ◄ button to decrease the - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 35
Enter Exit Logo Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on. `` Default: The default startup screen. `` User: Use stored picture from "Logo Capture" function. Logo Capture Press ► button to capture an - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 36
Auto Power Off (min) Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Lamp Setting Refer to page 36. Dynamic Black `` On: The pictures with - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 37
`` Off: Choose "Off" to hide the lamp end of life warning message. Lamp Power Mode `` Normal: Normal mode. `` ECO: Use this function to dim the projector lamp which will lower power consumption and extend the lamp life. Clear Lamp Hours Choose "Yes" to reset the lamp hour counter after replacing the - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 38
you applied. If the input signal is analog, the projector can not automatically identification signal to manually switch to the "on". When "3D" is enabled Frame Sequential" and "Field Sequential". "Frame Sequential" is supported the DLP Link 3D input signals from VGA / HDMI connector. "Frame Sequential" - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 39
graphic source from HDMI/VGA input. Other sources are not supported. If "3D" function is enabling, "Interactive" feature is "Off" to disable the Interactive Pen function. You need to unplug the Mini USB cable that connects NB/desktop with the projector before using the Interactive function. After - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 40
Store Reset Select Enter Exit `` DHCP: If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be acquired when you select DHCP On. If DHCP is Off, manually set the IP Address, Subnet Mask, and Gateway. Use ▲ or ▼ to select the number of IP - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 41
Timer Presentation Timer Timer Period Timer Display Timer Position Timer counting direction Start Counting 1 min Bottom Right Count Down Select Enter Exit Timer Period Select timer period from 1 to 240 min. Timer Display Select timer display from 1 min, 2 min, 3 min, Never or Always. Timer - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 42
a DHCP server to automatically assign an IP, or manually enter the required network information. LAN Settings DHCP Off ("space" and the other punctuation key included): Category Item Projector Admin Password Projector Name Location Administrator New Password Confirm Input-Length (characters) - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 43
Step 1: Find an IP Address (192.168.10.100) from LAN function of projector. Step 2: To open Network Connections, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections. Click the connection you want - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 44
(up to 21 characters for each field). Press Save to store the settings. `` Choose DHCP to assign an IP address to the projector from a DHCP server automatically, or Manual to assign an IP address manually. `` Set up the IP Address, Device ID and Port information on the Crestron function. 43 - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 45
120 minutes. See "Auto Power Off (min)" function. `` Alert Status: There are three error status: Lamp warning, Low lamp life, and Temperature warning. Your projector might lock up in protection mode if any of the alerts is activated. To exit protection mode, click the Clear to clear the Alert Status - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 46
warning Lamp life reminder Temperature warning Save Disable E-mail Alert Test `` E-mail Alert: You can set whether to be notified Setting Page Web Management Projector Information LAN Setting Projector Status and Control E-mail Service Center if you forget your administrator password. 45 - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 47
.0.100 `` Administrator Password: Enter the Administrator Password and click Login button. Firmware Update Page Web Management Projector Information LAN Setting Projector Status and Control E-mail Setting Security Setting Firmware Update Firmware Update Firmware update will take about a minute - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 48
3. Select the file to upgrade and click the Upgrade button. When upgrading is in progress, the Cancel button is disabled. Upgrade Firmware Please select a file (~.bin) to upgrade: Browse... Upgrade Cancel (Upgrading firmware may take 60 seconds) Upgrade must NOT be interrupted ! 4. When upgrade - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 49
Appendices Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image Problems No image appears on-screen `` Ensure all the cables and power connections are correctly - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 50
Apple System Preference -> Display -> Arrangement -> Mirror display yy If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector. The screen of the Notebook or PowerBook computer is not displaying your presentation Some Notebook PCs - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 51
the display mode of your graphic card to make it compatible with the product. Image is out of focus `` Adjust the "Focus Ring" on the projector lens. `` Make sure the projection screen is within the required distance. Refer to Pages 17-18. The image is stretched when displaying 16:9 DVD title - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 52
not any obstructions between the remote control and the projector. Move to within 8 m (±0°) of the projector. `` Make sure the batteries are inserted correctly. `` Replace batteries if they are exhausted. Sound Problems If no sound from the projector `` If you are playing an external source, make - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 53
-by-Side(Half)" for input signal is HDMI 1.4a 3D. 3D Format is only supported on 3D Timing on page 58. On Screen Messages yy Power off confirm Power Off? Press power key again. yy Fan lock error Warning! FAN LOCKED The projector will switch off automatically. yy No source found VGA-A No Source Found - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 54
Compatibility Modes yy VGA Analog -- PC signal Modes VGA IBM SVGA Apple, MAC II XGA Apple, MAC II SXGA QuadVGA SXGA+ UXGA Resolution 640x480 640x480 640x480 640x480 640x480 640x480 720x400 800x600 800x600 800x600 800x600 800x600 800x600 832x624 1024x768 1024x768 1024x768 1024x768 1024x768 - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 55
-- Extended wide timing Modes Resolution 1280x720 WXGA 1280x800 1366x768 1440x900 WSXGA+ 1680x1050 V. Frequency [Hz] 60 60 60 60 60 H. Frequency [Hz] 44.8 49.6 47.7 59.9 65.3 -- Component signal Modes Resolution 480i 720x480(1440x480) 576i 720x576(1440x576) 480p 720x480 576p - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 56
yy HDMI Digital -- PC signal Modes VGA IBM SVGA Apple, MAC II XGA Apple, MAC II SXGA QuadVGA SXGA+ UXGA Resolution 640x480 640x480 640x480 640x480 640x480 640x480 720x400 800x600 800x600 800x600 800x600 800x600 800x600 832x624 1024x768 1024x768 1024x768 1024x768 1024x768 1152x870 1280x1024 - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 57
-- Extended wide timing Modes WXGA WSXGA+ Resolution 1280x720 1280x800 1366x768 1440x900 1680x1050 V. Frequency [Hz] 60 60 60 60 60 H. Frequency [Hz] 44.8 49.6 47.7 59.9 65.3 -- Video signal Modes 480p 480i 576i 480p 576p 720p 720p 1080i 1080i 1080p 1080p 1080p Resolution 640x480 720x480( - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 58
the end of its useful life Replacement suggested! When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 60 minutes before changing the lamp. 1 2 3 4 The screws on the lamp - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 59
Replacing and cleaning the optional dust filter We recommend cleaning the dust filter after every 500 hours of use, clean it more often if the projector is used in a dusty environment. Warning! Dust Filters The usage time of the dust filter is reached. Please clean the dust filters for better - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 60
Installation If you wish to use a third party ceiling mount kit, please ensure the screws which are used to attach a mount to the projector meet the following specifications: yy Screw type: M4x4 -- Diameter: 4 mm -- Length: 11 mm Please note that damage resulting from incorrect installation will - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 61
Projection screen size Max. focus screen size Projection distance Throw ratio Horizontal scan rate Vertical refresh scan rate Keystone correction Weight Dimensions (W x D x H) Power supply Power consumption Operating temperature PJD8653ws PJD8353s DLP® WXGA (1280x800) XGA (1024x768) IBM PC and - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 62
jack input (Microphone)x 1 yy 3.5 mm audio jack input x 1 yy Mini USB B x 1 yy AC power cord x 1 yy VGA cable x 1 yy Remote control x 1 yy AAA x 2 yy User's guide (DVD) x 1 yy Quick start card x 1 Design and specifications are subject to change without prior notice. 61 - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 63
.com/uk/support/call-desk/ Hong Kong www.hk.viewsonic.com T= 852 3102 2900 [email protected] India www.in.viewsonic.com T= 1800 266 0101 [email protected] Korea www.kr.viewsonic.com T= 080 333 2131 [email protected] Latin America (Argentina) www.viewsonic.com/la - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 64
ViewSonic office for the warranty information. Limited One (1) year Heavy Usage Warranty: Under heavy usage settings, where a projector local ViewSonic office follow instructions supplied anyone not authorized by ViewSonic. e. Any damage of or parts not meeting ViewSonic's specifications. i. Normal - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 65
, contact ViewSonic Customer Support (please refer to "Customer Support" page). You will need to provide your product's serial number. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 66
modification, unauthorized attempted repair, or failure to follow instructions supplied with the product. b. Any damage service charges. How to get service: For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached Customer Support - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 67
Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic Services USA SUPPORT: ViewSonic - ViewSonic PJD8353s | PJD8353S, PJD8653WS User Guide (English) - Page 68
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
 |
 |
PJD8653ws/PJD8353s
DLP Projector
User Guide
IMPORTANT:
Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://www.
viewsonic.com in English, or in specific languages using the Regional selection box in the
upper right corner of our website. “Antes de operar su equipo lea cu idadosamente las
instrucciones en este manual”
Model No. VS14956/VS14991