ViewSonic PJD8353s PJD8353S, PJD8653WS User Guide (English) - Page 16
Powering Off the Projector, LED Indicator Messages - drivers
View all ViewSonic PJD8353s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Powering off the projector 1. Press the " " button on the control panel or on the remote control to turn off the projector. The following message will be displayed on the screen. Press the " " button again to confirm. Power Off? Press power key again. 2. The Power LED will turn red and blink rapidly after the projector is turned off. And the fans will continue to operate for about 10 seconds to ensure that the system cools properly. 3. Once the system has finished cooling, the Power LED will stop blinking and turn solid red to indicate standby mode. 4. It is now safe to unplug the power cord. LED Indicator Messages Message Lamp LED (Red) Temp LED (Red) Power LED (Red) Power Plug Flash ON to OFF Flash ON to OFF Flash ON to OFF 100ms 100ms 100ms Standby - - ON Power button ON Cooling state - - - 0.5 second H(ON), - - 0.5 second L(OFF) flashing Power button OFF: Cooling completed; Standby Mode - - ON Firmware download ON ON ON Thermal sensor error, OSD showing as below: 1. Make sure air in and outlets are not blocked. - ON - 2. Make sure the environment temperature is under 40 degree C. Fan lock error, OSD showing as below: The projector will switch off automatically. 0.5 second H(On), - 0.5 second L(Off) - flashing Lamp error (Lamp, Lamp driver, Color wheel) ON - - Power LED (Blue) ON - ON ON ON 15