ViewSonic PJD8353s PJD8353S, PJD8653WS User Guide (English) - Page 38
D Invert, 3D Format, 1080p @24
View all ViewSonic PJD8353s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
3D 3D 3D Off 3D Invert Off 3D Format 1080p@24 Select Enter Exit 3D `` Auto: When a HDMI1.4a 3D timing identification signal is detected, the 3D image is selected automatically. `` Choose "Off" to disable 3D function. `` Choose "On" to enable 3D function. The 3D display performance will depend on the 3D glasses you applied. If the input signal is analog, the projector can not automatically identification signal to manually switch to the "on". When "3D" is enabled, "Color Mode", "Digital Zoom", "Color Temp.", "Dynamic Black" and "Interactive" functions are not supported. 3D Invert If you see a discrete or overlapping image while wearing DLP 3D glasses, you may need to execute "Invert" to get best match of left/right image sequence to get the correct image. 3D Format Use this feature to select the 3D format. Options are: "Frame Packing", "Side-by-Side (Half)", "Top and Bottom", "Frame Sequential" and "Field Sequential". "Frame Sequential" is supported the DLP Link 3D input signals from VGA / HDMI connector. "Frame Sequential" / "Field Sequential" are supported the HQFS 3D input signals from Composite/Svideo connector. "Frame Packing" / "Side-by-Side(Half)" / "Top and Bottom" are supported from HDMI 1.4a 3D input signals. 1080p @24 Use this feature to select 96 or 144Hz refresh rate as using 3D glasses in the1080p @ 24 frame packing. 37