ViewSonic PJD8353s PJD8353S, PJD8653WS User Guide (English) - Page 53
On Screen Messages
View all ViewSonic PJD8353s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Two images, side-by-side format `` Select "3D" --> "3D Format" from OSD and choose "Side-by-Side(Half)" for input signal is HDMI 1.4a 3D. 3D Format is only supported on 3D Timing on page 58. Image does not display in 3D `` Check if the battery of 3D glasses is drained. `` Check if the 3D glasses is turned on. `` Select "3D" --> "3D Format" from OSD and choose "Side-by-Side(Half)" for input signal is HDMI 1.4a 3D. 3D Format is only supported on 3D Timing on page 58. On Screen Messages yy Power off confirm Power Off? Press power key again. yy Fan lock error Warning! FAN LOCKED The projector will switch off automatically. yy No source found VGA-A No Source Found yy Out of display range VGA Out of display range yy Over temperature Warning! TEMPERATURE TOO HIGH Please: 1. Make sure air in and outlets are not blocked. 2. Make sure the environment temperature is under 40 degree C. 52