ViewSonic PT770 User Guide - Page 31

Factory Preset Timings The following table lists the factory preset timings: Resolution Horizontal Vertical Polarity of Syn- Frequency Frequency chronizing Signal (kHz) (Hz) HorizNertical VGA 640x350@70Hz 640 x 350 31.47 70.0 +/- E N VGA 640x400@70Hz 640 x 400 31.47 70.0 G VGA 640x480@60Hz 640 x 480 31.47 60.0 -1- VESA 640x480@ 72Hz 640 x 480 37.90 72.0 -/- VESA 640x480@ 75Hz 640 x 480 37.50 75.0 -/- SVGA 800x600@ 56Hz 800 x 600 35.20 56.0 +/+ VESA 800x600@60Hz 800 x 600 37.90 60.0 VESA 800x600@72Hz 800 x 600 48.10 72.0 +/+ VESA 800x600@ 75Hz 800 x 600 46.90 75.0 VESA 800x600@85Hz 800 x 600 53.67 85.0 8514/A 1024x768, interlace 1024 x 768 35.50 87.0i +/+ VESA 1024x768 C 60Hz 1024 x 768 48.40 60.0 -/- VESA 1024x768@ 70Hz 1024 x 768 57.50 70.0 -/- VESA 1024x768@ 75Hz 1024 x 768 60.00 75.0 +/+ VESA 1024x768@ 85Hz 1024 x 768 68.68 85.0 +/+ VESA 1280x1024@75Hz 1280 x 1024 80.00 75.0 +/+ Mac 640x480@67Hz 640 x 480 35.00 67.0 Mac 832x624 @ 75Hz 832 x 624 49.70 74.6 -/- Mac 1024x768@75Hz 1024 x 768 60.20 75.0 -/- Mac 1152x870@ 75Hz 1152 x 870 68.68 75.0 -/- Note • Size and position may not be able to be set as desired if input timing is not within horizontal and vertical frequency range. Before registering a new signal, check the items for horizontal and vertical timing under the specifications. • If new timing is registered, the old timing settings will be deleted. • If the difference between any of the factory preset timings and the user's timing is smaller than the allowable deviation, and the polarity of their synchronizing signals are the same, then they are considered to be the same, and the user's timing will not be registered. 24 Operation ViewSonic PT770