ViewSonic PT770 User Guide - Page 5
Safety, Guidelines
UPC - 766907106015
View all ViewSonic PT770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Safety Guidelines Caution: Use a power cable that is properly grounded. Always use the AC cords listed below for each area: USA . , . , „ UL Canada CSA Germany VDE Switzerland SEV Britain BASEC/BS Japan E Electric Appliance Control Act N In other areas, use AC cord which meets local safety standards. G L FOR EUROPEAN VERSION ONLY This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced, ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark 'kV on the body of the fuse. If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover, the plug must not be used until a replacement cover is obtained, A replacement fuse cover can be purchased from your local ViewSonic dealer. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME, THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMP SOCKET. If a new plug is to be fitted, please observe the wiring code as shown below. If in any doubt, please consult a qualified electrician. WARNING: THIS APPLIANCE MUST BE GROUNDED. Important: The wires in the main leads are colored in accordance with the following code: Green-Yellow Ground Blue Neutral Brown Live The colors of the wires in the main leads of this appliance may not correspond with the colored markings identifying the terminals in your plug. Please comply with the following instructions: • The Green-Yellow wire must be connected to the green or green-yellow terminals in the plug and marked with the letter E or with the ground symbol. • The Blue wire must be connected to the Black terminal in the plug marked with the letter N.