Vivitar DVR 943HD Camera Manual - Page 5
Initial Camera Setup
View all Vivitar DVR 943HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Initial Camera Setup Installing the Battery Installing the Memory Card Charge before using your camera for the first time. To Charge the Lithium Battery: 1. Power Off the camcorder. 2. Make sure the battery is inserted correctly. 3. Connect the camcorder with the USB cable to the computer or supplied AC Adapter (which you then plug into an electrical outlet). 4. Allow the battery to charge for at least 4 hours before using the first time. 5. The charge light will turn off when the battery is fully charged. Turning On the Camera Insert SD Memory card (up to 32GB) before use. Important: You must use a Class 4 SD card or higher SD card only. Using the Camera 5
5
Initial Camera Setup
Installing the Battery
Installing the Memory Card
Charge before using your camera for the first
time.
To Charge the Lithium Battery:
1. Power Off the camcorder.
2. Make sure the battery is inserted correctly.
3. Connect the camcorder with the USB cable
to the computer or supplied AC Adapter
(which you then plug into an electrical outlet).
4. Allow the battery to charge for at least 4
hours before using the first time.
5. The charge light will turn off when the
battery is fully charged.
Turning On the Camera
Using the Camera
Important:
You must
use a Class 4 SD card
or higher SD card
only.
Insert SD Memory
card (up to 32GB)
before use.