Vizio M507RED-G1 User Manual - Page 18
Picture, Color Calibration, Color Tuner, SMPTE Test Pattern
View all Vizio M507RED-G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
3 Adjusting the Color Tuner Settings The Color Tuner settings allow you to adjust the color management system, 2 point white balance, 11 point white balance, turn color channels off for testing, and display SMPTE, flat, ramp, and uniformity analyzer test patterns. WARNING: The Color Tuner, 11 Point White Balance, and test patterns allow technicians to manually calibrate the TV . Calibration requires specialized training, an input with precisely set colors, and a specialized light meter . To access the color tuner table: Menu > Picture > Color Calibration > Color Tuner To turn color channels off and on: 1 . Use the Arrow buttons on the remote to highlight Red, Green, or Blue . 2 . Press the OK button to turn the color channel off or on. An X appears over a color channel that has been turned off. 3 . Only two color channels can be turned off at the same time. To adjust the color management system/2 point white balance settings: 1 . Use the Arrow buttons on the remote to highlight the Hue, Saturation, Brightness, Offset, or Gain of the color you wish to adjust. Press the OK button . 2 . Use the Left/Right Arrow buttons to adjust the value. When you are finished press the OK button to save the setting . To adjust the 11 Point White Balance settings: Red Hue 0 Saturation -1 Brightness -24 Offset 0 Gain 0 Green 0 5 0 0 0 Color Tuner Blue 0 -4 -22 0 0 Cyan 0 0 0 Magenta 25 -2 0 Yellow -14 0 0 1 . From the Color Tuner table, use the Arrow buttons to highlight the top bar and then press the Left/Right Arrow buttons until the 11 POINT WHITE BALANCE menu is displayed . Gain 5% 11 Point White Balance Red Green 0 0 Blue 0 To show or hide the SMPTE Test Pattern: Menu > Picture > Color Calibration > Color Tuner > SMPTE Test Pattern SMPT Test Pattern Off 1 . Use the Arrow buttons on the remote to highlight Off . Use the Left/Right Arrow buttons to select On to show the SMPTE Pattern . -or- 2 . To hide the SMPTE Test Pattern, use the Left/Right Arrow buttons to select Off . TIP: Any changes made affect the color temperature setting. Select the preferred color temperature setting first. See Adjusting the Color Temperature on page 16. 2 . Use the Arrow buttons on the remote to highlight the Gain and Color values you wish to adjust . Press the OK button and use the Left/Right Arrow buttons to adjust the value. When you are finished, press the OK button to save the setting . 18