Weider Pro 9450 Uk Manual - Page 12

18. Wrap the High Cable (58) around a "V"-Pulley (50). 18 Attach the "V"-Pulley and a Long Cable Trap (31) to the indicated bracket on the Front Upright (42) with a 3/8" x 2 1/2" Bolt (86) and a 3/8" Nylon Locknut (21). Be sure that the Long Cable Trap is posi- tioned to hold the Cable in place. 19. Route the High Cable (58) around the "V"-Pulley (50) on the Left Arm (47). Be sure that the Cable 19 is in the groove of the Pulley and that the Long Cable Trap (31) is positioned to hold the Cable in place. Tighten the 3/8" x 2 1/2" Bolt (86) and the 3/8" Nylon Locknut (not shown). 86 31 58 50 21 42 Bracket 50 86 31 58 47 20. Route the High Cable (58) around the "V"-Pulley (50) on the Right Arm (48). Be sure that the Cable 20 is in the groove of the Pulley and that the Long Cable Trap (31) is turned to hold the Cable in place. Tighten the 3/8" x 2 1/2" Bolt (86) and the 3/8" Nylon Locknut (not shown). 31 86 50 58 48 21. Attach the Pulley Bracket (20) to the Top Frame (55) with the 5/16" x 5" Bolt (68) and a 5/16" Nylon 21 68 Locknut (3). Do not over tighten the Nylon Locknut; the Pulley Bracket must be able to move freely. See the inset drawing. Route the High Cable (58) 55 66 around the 3 1/2" Pulley (15) attached to the Pulley Bracket (20). Tighten the 3/8" x 2" Bolt (12) and the 20 12 3/8" Nylon Locknut (not shown). Be sure that the Cable is in the groove of the Pulley and that the Cable Trap (66) is turned to hold the Cable in 3 15 58 place. 12