Weider Pro 9450 Uk Manual - Page 26
Insert a Pad Tube 28 into the Front Seat Frame
View all Weider Pro 9450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
41. Press a 1 1/2" Square Inner Cap (32) into the Leg 41 Lever (29). Lubricate the 5/16" x 2 1/4" Bolt (33). Attach the Leg Lever (29) to the Front Seat Frame (36) with the Bolt and a 5/16" Nylon Locknut (3). Insert the 3/8" x 2" Eyebolt (35) into the Leg Lever (29) from the direction shown. Tighten a 3/8" Washer (9) and a 3/8" Nylon Locknut (21) onto the Eyebolt. 42. Slide one of the three slots in the bracket on the 42 Front Seat Frame (36) onto the indicated pin on the Front Upright (42). Attach the Front Seat Frame to the Front Upright with a 5/16" x 2 3/4" Carriage Bolt (14), a 5/16" Washer (8), and the Seat Knob (40). Note: The Seat can be attached at three differ- ent heights. 33 35 32 36 3 29 12 21 40 42 8 14 36 Pin 43. Press two 3/4" Round Inner Caps (34) into each 43 Pad Tube (28). Insert a Pad Tube (28) into the Front Seat Frame (36). Slide a Foam Pad (30) onto each end of the Pad Tube. Insert the other Pad Tube (28) into the Leg Lever (29). Slide a Foam Pad (30) onto each end of the Pad Tube. 19 36 30 34 28 34 30 29