Weider Pro 9450 Uk Manual - Page 25
Seat Assembly
View all Weider Pro 9450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
SEAT ASSEMBLY 37. Locate and open the parts bag labelled "SEAT ASSEMBLY." Insert a 1/4" x 2 1/2" Carriage Bolt (92) through the centre hole in a Seat Plate (37). Attach the Seat Plate to the Leg Press Backrest (85) with two 1/4" x 3/4" Screws (18). Insert the 1/4" x 2 1/2" Carriage Bolt (92) through the indicated hole in the Leg Press Upright (56). Tighten a 1/4" Nylon Locknut (2) with a 1/4" Washer (10) onto the Carriage Bolt. Attach the top of the Leg Press Backrest (85) to the Leg Press Upright with a 1/4" x 2 1/2" Screw (43) and a 1/4" Washer (10). 38. Attach one end of a Seat (13) to the Leg Press Seat Frame (79) with two 1/4" x 3/4" Screws (18). Attach the other end of the Seat to the Leg Press Seat Frame with a 1/4" Washer (10) and a 1/4" x 2 1/2" Screw (43). 39. Attach the Front Backrest (41) to the Front Upright (42) with two 1/4" x 2 1/2" Screws (43) and two 1/4" Washers (10). Note: Make sure the Backrest is oriented as shown. 37 85 56 18 37 92 43 10 2 38 13 18 79 10 43 39 42 41 43 10 40. Press a 1 1/2" Square Inner Cap (32) into the Front Seat Frame (36). 40 Insert a 1/4" x 2" Carriage Bolt (38) through the centre hole in the Seat Plate (37). Attach the Seat Plate to the Seat (13) with two 1/4" x 3/4" Screws (18). Insert the 1/4" x 2" Carriage Bolt (38) through the indicated hole in the Front Seat Frame (36). Tighten a 1/4" Nylon Locknut (2) with a 1/4" Washer (10) onto the Carriage Bolt. Attach the other end of the Seat (13) to the Front Seat Frame (36) with a 1/4" Washer (10) and a 1/4" x 2" Machine Screw (81). 18 Thick End 13 38 37 18 32 36 81 10 2