Weider Pro 9930 User Manual - Page 11

shown. Attach the V Pulley and a Long Cable Trap

Get Weider Pro 9930 PDF manuals and user guides View all Weider Pro 9930 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

15. Wrap the Short Cable (71) over a "V" Pulley (21) as 15 shown. Attach the "V" Pulley and a Long Cable Trap (14) to one side of the welded bracket on the Butterfly Upright (62) with a 3/8" x 2 1/2" Bolt (6) and a 3/8" Nylon Locknut (4). Wrap the Short Cable (71) over another "V" Pulley (21), and attach the "V" Pulley and a Long Cable Trap (14) to the other side of the welded bracket on the 62 Butterfly Upright (62) in the same manner. 16. Identify the Medium Cable (72). It has a ball on 16 one end and a threaded shaft on the other. Wrap the Medium Cable over a 3 1/2" Pulley (5) as shown. Attach the Pulley to the Press Top Frame (63) with a 3/8" x 3 1/2" Bolt (24), a 3/8" Flat Washer (17), and a 3/8" Jam Nut (18). Make sure that the Medium Cable (72) is between the 3 1/2" Pulley (5) and the welded pin on the Press Top Frame (63). 6 21 14 4 21 6 Welded Bracket 14 71 63 24 5 18 17 72 Pin 17. Note: It may be helpful to loosen the indicated 17 5/16" Nylon Locknuts (2) before beginning this step. Wrap the Medium Cable (72) over a 3 1/2" Pulley (5) as shown. Attach the Pulley and a Cable Trap (39) to the Press Top Frame (63) with a 3/8" x 3 3/4" Bolt (7). 2 5 39 7 72 63 18. Route the threaded shaft on the Medium Cable (72) 18 under one of the 3 1/2" Pulleys (5) that are already mounted in the Double "U"-Bracket (36). Tighten the 3/8" x 1 3/4" Bolt (22). 11 72 5 22 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
11
15. Wrap the Short Cable (71) over a “V” Pulley (21) as
shown. Attach the “V” Pulley and a Long Cable Trap
(14) to one side of the welded bracket on the Butterfly
Upright (62) with a 3/8” x 2 1/2” Bolt (6) and a 3/8”
Nylon Locknut (4).
Wrap the Short Cable (71) over another “V” Pulley
(21), and attach the “V” Pulley and a Long Cable Trap
(14) to the other side of the welded bracket on the
Butterfly Upright (62) in the same manner.
17.
Note: It may be helpful to loosen the indicated
5/16” Nylon Locknuts (2) before beginning this
step.
Wrap the Medium Cable (72) over a 3 1/2” Pulley (5)
as shown. Attach the Pulley and a Cable Trap (39) to
the Press Top Frame (63) with a 3/8” x 3 3/4” Bolt (7).
16.
Identify the Medium Cable (72). It has a ball on
one end and a threaded shaft on the other.
Wrap
the Medium Cable over a 3 1/2” Pulley (5) as shown.
Attach the Pulley to the Press Top Frame (63) with a
3/8” x 3 1/2” Bolt (24), a 3/8” Flat Washer (17), and a
3/8” Jam Nut (18).
Make sure that the Medium Cable (72) is between
the 3 1/2” Pulley (5) and the welded pin on the
Press Top Frame (63).
15
16
62
Welded
Bracket
6
6
21
21
14
14
4
71
17
72
17
Pin
18
63
5
24
7
72
63
5
39
2
18
36
22
5
72
18. Route the threaded shaft on the Medium Cable (72)
under one of the 3 1/2” Pulleys (5) that are already
mounted in the Double “U”-Bracket (36). Tighten the
3/8” x 1 3/4” Bolt (22).