Weslo Gym 1500 Uk Manual - Page 10

14. Attach the Long Cable (47) to the Small "U"- 14 Bracket (24) with an M8 Nylon Locknut (58) and an M8 Washer (60). See the inset drawing. Do not overtighten the Nylon Locknut; it should be threaded onto the end of the Cable only two turns. 47 79 60 47 24 58 26 Attach the Small "U"-Bracket (24) to the Weight Tube (26) with an M8 x 42mm Bolt (79) and an M8 Nylon Locknut (58). Do not overtighten the 58 Nylon Locknut; the "U"-Bracket must be able to pivot on the Weight Tube. 24 15. Locate the Short Cable (48). Route the Short Cable through the cage on the Press Frame (6). Attach a 90mm Pulley (44) to the Press Frame with an M10 x 195mm Bolt (75) and an M10 Nylon Locknut (68). Be sure that the end of the Cable with the ball is on the indicated side of the cage. 16. Wrap the Short Cable (48) around a 90mm Pulley (44). Attach the Pulley and a pair of Pulley Covers (43) to the lower hole in the Upright (3) with an M10 x 98mm Bolt (78), an M10 Washer (62), and an M10 Nylon Locknut (68). Be sure the small tabs on the Pulley Covers are on the side shown. 15 6 75 Cage 44 68 Ball 48 16 3 44 43 78 43 62 68 Small Tabs 48 17. Wrap the Short Cable (48) around a 90mm Pulley 17 (44). Attach the Pulley and a pair of Pulley Covers (43) to the Press Frame (6) with an M10 x 85mm Bolt (66), an M10 Washer (62), and an M10 Nylon Locknut (68). Be sure the large tabs on the Pulley Covers are on the side shown. 10 6 68 66 62 44 43 48 43 Large Tab