Weslo Gym 1500 Uk Manual - Page 11
Seat Assembly
View all Weslo Gym 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
18. Wrap the Short Cable (48) around a 90mm Pulley 18 (44). Attach the Pulley and a pair of Pulley Covers (43) to the middle hole in the Upright (3) with an M10 x 98mm Bolt (78), an M10 Washer (62), and an M10 Nylon Locknut (68). Be sure the large tabs on the Pulley Covers are on the side shown. 3 48 78 44 43 43 62 Large Tabs 68 19. Attach the end of the Short Cable (48) to the 19 Long "U"-Bracket (23) with an M8 Nylon Locknut (58) and an M8 Washer (60). See the inset drawing. Do not overtighten the Nylon Locknut; it should be threaded onto the end of the Cable so only two threads are showing above the nut. 23 58 23 60 58 48 48 Seat Assembly 20 20. Press two 38mm Square Inner Cap (53) into the Seat Frame (5). Insert the M6 x 50mm Carriage Bolt (71) into the centre hole in the Seat Plate (42). Attach the Seat Plate to the Seat (12) with two M6 x 16mm Screws (67). Insert the M6 x 50mm Carriage Bolt (71) into the indicated hole in the Seat Frame (5). Tighten an M6 Nylon Locknut (61) and an M6 Washer (63) onto the Carriage Bolt. Attach the other end of the Seat (12) to the Seat Frame (5) with a an M6 Washer (63) and the M6 x 50mm Screw (70). 12 63 70 61 71 42 67 53 5 53 11