Weslo Gym 1500 Uk Manual - Page 13

IMPORTANT: If

Get Weslo Gym 1500 PDF manuals and user guides View all Weslo Gym 1500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

24. Press four 19mm Round Inner Caps (39) into the 24 ends of the two Pad Tubes (37). Insert one Pad Tube (37) into the Seat Frame (5). Slide two Foam Pads (38) onto the ends of the Pad Tube. Insert the other Pad Tube (37) into the Leg Lever (8). Slide two Foam Pads (38) onto the ends of the Pad Tube. 5 37 38 38 37 8 39 39 38 25. Attach the Preacher Pad (13) to the Preacher 25 Post (14) with two M6 x 16mm Screws (67). 14 67 26. Slide two Handgrips (31) onto the ends of the Lat 26 Bar (32). 32 31 13 31 27. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENTS, beginning on the following page. Before using the weight system, pull each cable a few times to be sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE DIAGRAM on page 17 of this manual for proper cable routing. If there is any slack in the cables, you will need to remove it by tightening the cables; see TROUBLESHOOTING AND MAINTENANCE on page 18. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
24. Press four 19mm Round Inner Caps (39) into the
ends of the two Pad Tubes (37).
Insert one Pad Tube (37) into the Seat Frame (5).
Slide two Foam Pads (38) onto the ends of the
Pad Tube.
Insert the other Pad Tube (37) into the Leg Lever
(8). Slide two Foam Pads (38) onto the ends of
the Pad Tube.
24
5
38
37
37
39
39
8
38
38
13
25. Attach the Preacher Pad (13) to the Preacher
Post (14) with two M6 x 16mm Screws (67).
26. Slide two Handgrips (31) onto the ends of the Lat
Bar (32).
25
26
13
31
31
14
32
67
27. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in
ADJUSTMENTS, beginning on the following page.
Before using the weight system, pull each cable a few times to be sure that the cables move smoothly over
the pulleys. If one of the cables does not move smoothly, find and correct the problem.
IMPORTANT: If the
cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE
DIAGRAM on page 17 of this manual for proper cable routing.
If there is any slack in the cables, you
will need to remove it by tightening the cables; see TROUBLESHOOTING AND MAINTENANCE on
page 18.