Weslo Gym 1500 Uk Manual - Page 15

ATTACHING AND REMOVING THE SEAT Set the bracket on the Seat Frame (5) onto the indicated pin on the Upright (3). Attach the Seat Frame to the Upright with the M8 x 65mm Carriage Bolt (57) and the Seat Knob (21). For some exercises, the Seat (12) must be removed. First, be sure that the Chain (not shown) is not attached to the Leg Lever (8). Next, remove the Seat Knob (21) and the M8 x 65mm Carriage Bolt (57) from the Seat Frame (5). Lift the Seat Frame off the Upright (3). 5 3 21 57 12 8 Pin ATTACHING THE LEG LEVER TO THE LOW PULLEY STATION To use the Leg Lever (8), the seat must be attached to the upright (see ATTACHING AND REMOVING THE SEAT, above). Attach the Short Cable (48) to the bracket on the back of the Leg Lever (8) with a Chain (36) and two Cable Clips (35). ATTACHING THE PREACHER PAD To use the Preacher Pad (13) remove the indicated 38mm Square Inner Cap (53) from the Seat Frame (5). Insert the Preacher Post (14) into the Seat Frame and secure it with the Preacher Knob (15). LOCKING THE WEIGHT STACK To prevent unauthorised use of the weight system, insert the Locking Bar (27) into the indicated hole in one of the Weight Guides (16) and secure the Locking Bar with the Lock (28). Remove the Lock (28) and Locking Bar (27) to use the weight system again. 8 48 35 36 53 15 13 14 5 16 27 28 15