Whirlpool WHD3090G Owners Manual - Page 11
dryer after program/cycle ends
View all Whirlpool WHD3090G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
10. If an automatic cycle was selected, set dryness level Wool Bulky/Bedding DrynesAsir Dry X-Dry Level Refresh Dry Timed Dry Damp Dry When you select an automatic cycle, the indicator light above "Dryness Level" lights up. Turn the knob to select the desired level. As you turn the knob, an indicator light will light up next to the dryness levels to the right of the knob. Stop turning when the indicator next to the desired level lights up. Press the knob to confirm your selection. 11. Select any additional options* Options 13. Touch Power button to turn off dryer after program/cycle ends When the display indicates that the cycle has finished, touch the Power button to turn off the dryer. Open the door and take out your laundry. To save energy, the dryer turns off automatically about a quarter hour after the program/cycle ends. If not turned off right after the program/cycle ends, the dryer will tumble the laundry for about 10 minutes to prevent wrinkling. The display shows an animation. NOTE: If the Power button is touched and held, a countdown will be displayed. At the end of the countdown, any errors will be erased and the program/cycle will restart. 14. Remove garments promptly after cycle is finished Wool Bulky Bedding Air Dry X-Dry Refresh Dry Timed Dry Damp Dry After setting drying time or dryness level, the indicator light above "Options" lights up. Turn the knob to select the desired option(s). As you turn the knob, the option symbols above the Options button will light up one at a time as you turn the knob. Stop turning when the symbol of the desired option lights up. Press the knob to confirm your selection. *N ot all options and settings are available with all program/ cycles. See "Program/Cycle Guide" for available options and settings. 12. T ouch Start/Pause button to begin drying program/cycle Touch the Start/Pause button to start the drying program/ cycle. To pause a program/cycle in progress, touch the Start/ Pause button once, then touch again to continue the program/ cycle. To cancel a program/cycle, touch the Power button. Promptly remove garments to reduce wrinkling. after cycle has comMpliexteedd Heavy Duty Adapting the dryer to water conductivity Normal The drying results are affected by the conductivity of the water used during washing. levels (damp dry, dry, aIfn, dbyexmtroaddifryyin),gyothueaarevaniloSatybsnleatthdisreyfitneicedsswsith the final drying results, level. The dryer comes ywoituhcparnesaedtalepvtethl 3e.wCahtoeDor esceolincbadetutewcsteiveinty level 1 (most damp results) and 5 (most dry results). 1. Touch and hold the Program button. The display will count down until the Conductivity P Adjustment symbol on the display flashes Program 3 Sec Cycle Signal and the current setting is shown. 2. Turn the knob to adjust the level (1-2-3-4-5). Press the knob to confirm your selection. NOTE: This new setting will affect all future cycles. If the desired drying results are attained, water conductivity will not require further adjustment. 11