Whirlpool WOES5030LB Owners Manual - Page 14

Positioning Oven Feet for Multiple Cabinet Cutout Heights, Single Ovens

Get Whirlpool WOES5030LB PDF manuals and user guides View all Whirlpool WOES5030LB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Positioning Oven Feet for Multiple Cabinet Cutout Heights Single Ovens The positioning of the oven feet allow a single oven to be installed in a cutout height between 2615/16" and 297/16" (68.4 cm and 74.8 cm). Refer to the following instructions to position the feet for the size of your cabinet cutout. The oven feet need to be installed to allow the oven to be installed in a Flush Installation or in Standard Installations where the cutout height is 421/2" (107.9 cm) or more. The oven feet do not need to be changed. They are positioned correctly as received. Go to the "Make Electrical Connection" section. 2. Remove the foot from the right front spacer by removing the #8-18 x 3/8" screw. NOTE: Do not remove the spacer. A. Spacer B. Foot C. #8-18 x 3/8" (9.5 mm) screw 3. In the same manner, remove the feet on the right rear, left front, and left rear of the oven. 4. Using 2 or more people, place the oven in its upright position. Cutout Height is Between 271/4" and 2711/16" (69.2 cm and 70.3 cm) 1. Using 2 or more people, place the oven on its back on a covered surface. 5. Go to the "Make Electrical Connection" section. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
14
Positioning Oven Feet for Multiple
Cabinet Cutout Heights
Single Ovens
The positioning of the oven feet allow a single oven to be installed
in a cutout height between 26
15
/
16
" and 29
7
/
16
" (68.4 cm and
74.8 cm). Refer to the following instructions to position the feet for
the size of your cabinet cutout.
The oven feet need to be installed to allow the oven to be
installed in a Flush Installation or in Standard Installations
where the cutout height is 42
1
/
2
" (107.9 cm) or more.
The oven feet do not need to be changed. They are positioned
correctly as received.
Go to the “Make Electrical Connection” section.
Cutout
Height
is
Between
27
1
/
4
"
and
27
11
/
16
"
(69.2
cm
and
70.3
cm)
1.
Using 2 or more people, place the oven on its back on a
covered surface.
2.
Remove the foot from the right front spacer by removing the
#8-18 x 3/8" screw.
NOTE:
Do not remove the spacer.
A.
Spacer
B.
Foot
C.
#8-18 x 3/8" (9.5 mm) screw
3.
In the same manner, remove the feet on the right rear, left
front, and left rear of the oven.
4.
Using 2 or more people, place the oven in its upright position.
5.
Go to the “Make Electrical Connection” section.