Whirlpool WOES5030LB Owners Manual - Page 15
Double Ovens, Cutout Height is between 28, and 29, 72.8 cm and, and 50
View all Whirlpool WOES5030LB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Cutout Height is between 2811/16" and 297/16" (72.8 cm and 74.8 cm) NOTE: For installation, the tall shield is required to replace the shield that came with the unit. Please refer to your Quick Start Guide for the service number to call and request at no charge. 1. Using 2 or more people, place the oven on its back on a covered surface. 6. Using 2 or more people, place the oven in its upright position. 2. Remove the foot from the right front spacer by removing the #8-18 x 3/8" (9.5 mm) screw. NOTE: Do not remove the spacer. 7. Go to the "Make Electrical Connection" section. Double Ovens The positioning of the oven feet allow a double oven to be installed in a cutout height between 487/8" and 523/16" (124.1 cm and 132.6 cm). Refer to the following instructions to position the feet for the size of your cabinet cutout. Cutout Height is Between 487/8" and 507/16" (124.1 cm and 128.1 cm) The oven feet do not need to be installed. The oven is configured correctly as received. NOTE: Do not remove the spacers. Go to the "Make Electrical Connection" section. A. Spacer B. Foot C. #8-18 x 3/8" (9.5 mm) screw 3. Rotate the foot 90° so the short side of the foot is positioned toward the top of the oven. 4. Reinstall the foot to the spacer using the #8-18 x 3/8" (9.5 mm) screw previously removed. 5. In the same manner, remove, rotate and reinstall the feet on the right rear, left front, and left rear of the oven. A. Spacers 15