Xerox 2135DT Service Guide - Page 74
Service Tests and, Adjustments
UPC - 042215474696
View all Xerox 2135DT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Service Tests and Adjustments Starting the diagnostics mode To start the engine maintenance mode: 1. Turn off the printer. 2. Press and hold the Menu (1) and Enter (4) keys. 3. Turn on the printer. 4. When, DIAGNOSTIC MODE xx.xx.xx is displayed on the control panel (xx.xx.xx is the ROM version), release the control panel keys. 5. Press the Menu (1) key to enter the maintenance mode menu. 6. Press the Item (2) or (6) keys to scroll through the menu. 7. Press the Value (3) key to activate the displayed menu item. Press the Value (7) key to discontinue a test in progress. Use engine maintenance mode to test the printer sensors, test the media transport system, test the imaging LED banks, and to reset NVRAM. To exit engine maintenance mode, while DIAGNOSTIC MODE xx.xx is displayed, press Online (0). Alternately, you can turn the power off, wait a few seconds, and then turn power back on. Service Guide 61