Xerox 385 User Manual - Page 116

2 Press the Up or Down buttons to move through the memory until you find the name you want. 3 When the name and number you want appear, press the Start button to initiate dialing. Tone If your telephone service is configured for pulse dialing, you may still need to use Touch Tone signals to perform special operations by phone. Bankby-phone and voice mail are two examples of systems that require Touch Tone signals. You can send Touch Tone signals by following these steps: 1 Dial the number using pulse dialing. 2 When the remote phone answers, press *. Any numbers you now press will be sent as Touch tones for the remainder of the call. 3 Enter the remaining numbers required by the service. The machine returns to the pulse mode after you complete the call. 3-30 Sending a Fax