Xerox 385 User Manual - Page 159
Receiving a Fax Printed Too Light to Read, Printing Last Fax Data
UPC - 095205132960
View all Xerox 385 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
After receiving documents, the machine displays MEMORY RECEIVED and the cause. For example, NO PAPER. When the condition is cleared, for example by loading new paper or clearing a jam, the machine will automatically print the fax stored in memory. If you clear the problem while the machine is receiving documents into memory, it will print the stored document immediately upon clearing the problem. Receiving a Fax Printed Too Light to Read If the toner level in the Laser Printer Cartridge is low or empty, you may receive a fax which is printed too light to read. Fortunately, the machine stores the last 10 pages of received fax data, continuously updating the pages whenever a fax is received. This feature is always enabled to prevent loss of fax data due to low or empty toner. Follow the procedures below to print the Last Fax Data or to erase Last Fax Data from memory. Printing Last Fax Data: 4 1 Press the Menu button, then press the System Setup button on the One-Touch keypad. The display shows RINGER VOLUME ?. 2 Press the Up or Down button until the display shows LAST FAX DATA REPRINT ?. 3 Press Enter. 4 The LED display screen shown below appears. LAST FAX DATA 1:PRINT 2:CLEAR Reception Modes 4-7