Xerox 385 User Manual - Page 13

PC Cable Your Xerox WorkCentre 385 is equipped with a parallel interface port for use with IBM PCs and compatible computers. Using the supplied Centronics parallel cable, connect your WorkCentre 385 to a computer that supports bi-directional communications (IEEE standard 1284). Note: If using another parallel cable, ensure that it meets IEEE standard 1284 specifications. To connect the WorkCentre 385 to a computer, follow the steps below: CAUTION: Make sure the computer is turned off, and the WorkCentre 385 is unplugged from the power outlet. 1 Plug the parallel cable into the connector on the back of the WorkCentre 385. Swing the metal clips of the connector inward until they lock firmly inside the notches on the parallel cable connector. 1-10 Getting Started