Xerox 385 User Manual - Page 169

7 The display asks you to enter a name for the job. To assign a name to the polling job, enter the name. If a name is not desired, skip this step. 8 Press the Enter button. The display asks you to enter a 4-digit poll code. 9 If the remote machine is secured with a poll code, you must enter the correct code, and press the Enter button. Or If the remote machine is not secured with a poll code, press the Enter button to accept [0000] which represents no code. 10 The display prompts for the time at which the machine will call and poll the remote machine. To call the remote machine immediately, skip over this step without entering a time for polling. Or If a specific time for polling is desired, enter the time. If you have configured your machine to use a 12-hour format, remember to specify A.M. or P.M. 4 Note: If you set a time earlier than the current time, your machine calls the number at that time on the following day. 11 Press the Enter button. If you did not enter a specific time for polling, the machine dials the remote machine immediately. If you entered a specific start time, the machine will call and poll the remote machine at that time. Polling 4-11