Yamaha 500 YMC-700/500 Owners Manual - Page 16

Initial Setup 1 Select "Yes" to start the input source device setting. The "Source Device Setup" screen appears. 4 Check the confirmation screen, then select "Yes". SETUP If you select "No", the Source Device Setup procedure will be skipped. You can perform it later. (☞ P. 39) 2 Select the type of the device. Device 1 Cable box Time W CB-528 The device type, connection method, and names of the input displayed in the Watch/Listen/Play source menu screens (☞ P. 18) are shown. y When you want to change the setting, select "Retry". If you want to discard the setting, select "Cancel". 5 Select "Yes" to set the remote control code of the device. The "Source Device Setup - Remote Control" screen appears. Cable TV SAT - Satellite TV DVD y You can change the name of input source displayed in the source menu screen (☞ P. 18) to the desired one later (☞ P. 40). 3 Select the terminal to which the source component is connected. 2 pt 1 pt 15 pt HDMI 1 15 points If you select "Game" in step 2, "Will you use this device to Watch Movies?" appears. Select "Yes" or "No" in accordance with the intended use. If you select "Other" in step 2, you need to select the type of the input source device. For example, select "Cable TV". y You can skip the remote control code settings and set them later. (☞ P. 40) 6 Select the brand of the device. Press CH u / d to skip through the brand list alphabetically. Press PAGE u / d to scroll the list page by page. 7 Select the remote control code. When the selected brand has multiple remote control codes, select the first one. Continued If you select "DVD", "Blu-ray", or "Game" in step 2, "Will you use this device to Listen to CD's?" appears. Select "Yes" or "No" in accordance with the intended use. 15 En