Yamaha AW4416 Tutorial - Page 11
FADERS NOMINAL, move the cursor
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Tutorial-Mixdown 1. Make sure that the RECORDER [MONI] MIXING LAYER is selected. 2. Recall the scene number 01 "FADERS NOMINAL" provided to set faders 1 through 14 to nominal (Press the [SCENE] key, use the data dial to select the scene number 01 "FADERS NOMINAL", move the cursor to "RECALL", press [ENTER], select "OK" in the confirmation and press [ENTER] again). 3. Press the MIXER [VIEW] key so you can see the selected monitor channel parameters on the display. You might also have to press the [F1] function key to select the "CH View" page. 4. Hit the [PLAY] button and listen. The chart below lists the contents of the "So Fine" tracks. "V.Trk" at the left side of the chart refers to the recorder's virtual tracks (there are actually 8 virtual tracks for each recorder track). Note that although we'll be using only the main tracks (virtual track 1) for most of this tutorial, an alternate string take is provided on the second virtual tracks for recorder tracks 9 and 10, and a male lead vocal track is provided on the second virtual track of recorder track 14. Later on you'll use these alternate takes to build a mix based around a male rather than female lead vocal part. 1 2 3 4 5 6 7 8 V.Trk 1 Drums Left Drums Right Claves & E.Drm Bass Rthm Guitar Lead Guitar Organ Piano V.Trk 2 9 10 11 12 13 14 15 16 V.Trk 1 String Left String Right Fem. Ch. 1 Fem. Ch. 2 Male Ch. & Rap Lead Vocal (Fem) V.Trk 2 Alt. String Left Alt. String Right Lead Vocal (Male) 11 - Tutorial