Yamaha AW4416 Tutorial - Page 24
Phase 5: Finalize the Mix & Set Up Automation
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Tutorial-Mixdown Phase 5: Finalize the Mix & Set Up Automation Well, the basic mix is pretty much done. Now that all the processing and effects are in place you should listen carefully and make any final adjustments. But as you listen to the mix we've set up you'll probably notice that one "average" mix doesn't quite do justice to the entire song. You'll probably notice sections on which you'd like make a temporary change to the level of one track or another. This is where automation comes in handy. Back in the "pre-automation" days recording engineers would have to make such changes manually "on the fly". And if the changes involved a number of faders and controls simultaneously, then several people would have to be recruited to do the job. Of course, timing is critical, so the mix would often have to re-run many times until all the required changes could be made satisfactorily. Thank goodness for the AW4416. It will let you record fader, channel ON/Off, pan, and EQ automation changes one at a time so you can put together the perfect automix with relative ease. For the "So Fine" automix we've used a combination of fader, channel ON/OFF, and pan automation. Please refer to the AW4416 operation guide for details on how to record and edit automation. In this section we'll simply describe the changes we made and why we thought they were necessary. We suggest you enable our automix and watch the faders and channel ON keys as the song plays. To enable the automix: 1. Press the AUTOMATION [AUTOMIX] key and, if necessary, the [F1] function key to select the "Main" page. 2. Move the cursor to the "AUTOMIX" parameter and press [ENTER] to select "ENABLE". 3. And to select the pre-master automix: press the [F4] key to select the "Event List" page, move the cursor to the SCENE/LIB button on the display and press [ENTER] to highlight it, then move the cursor down to the scene number in the event list (it should be "06" initially) and use the data dial to change the scene number to "05". 4. Now go back to the VIEW display or any other display you want to watch while studying the automix. 24 - Tutorial