Yamaha DTXPRESS Reference Guide - Page 15

Drum Kit Voice Edit Mode This mode lets you set which voice and how it will be triggered for each pad (trigger input source) in the currently selected drum kit. ■ What you can do with the Drum Kit Voice Edit Mode This mode contains various settings related to the currently selected drum kit (data in the edit buffer for the drum kit). You can edit both preset (No. 1-48) and user drum kits (No. 4980). The edited drum kit can be stored in a User Drum Kit (No. 49-80) using the Store Operation. * Selecting another drum kit before storing your changes will result in the data reverting to its default settings. * Data cannot be stored to preset drum kits (No. 1- 48). ■ Entering the Drum Kit Voice Edit Mode Press the [VOICE] button on the front panel. Once the Drum Kit Voice Edit Mode is entered, the Voice Parameter main page (Voice) shown below will be displayed. KIT IN=pad 1 V=1 =K/017 BDaftty1 * Double-click the [VOICE] button to enter the Drum Kit Voice Edit Mode. The [1-2. Volume, Pan] display will appear. ■ What's in the Drum Kit Voice Edit Mode The Drum Kit Voice edit Mode is divided into the following five sub-groups. 1.Voice Parameters m P. 16) Sets the voice for each input source of the pad. 2. Input Common Parameters m P. 19) Common settings related to the 2 layers for each pad input source's voice parameter. 3. Reverb Parameters m P. 21) Sets the internal reverb effect. 4. Setup m P. 22) When the drum kit is selected, this function copies the drum kit voice settings and MIDI transmit settings. 5. Drum Kit Common Parameters ...... (m P. 23) Common settings for the entire drum kit. Procedure 1. Before editing, it is necessary to select the drum kit you want to edit in the Drum Kit Play Mode of the [Drum Kit & Song] display. 2. Press the [VOICE] button to enter the Drum Kit Voice Edit Mode. 3. Use the [PAGEs], [PAGEt] buttons to display the page you want to edit. * If the Utility Mode's [1- 4. Jump to Recent Page] (P. 28) parameter is set to "on", the DTXPRESS will display the page last edited when entering the Drum Kit Voice Edit Mode. 4. Use the [SEL] buttons to move the cursor to the parameter you want to edit. The parameter will flash. * If there is only one parameter, it is not necessary to move the cursor. 5. Use the [VALUE-]/[VALUE+] buttons to set the parameter's value or ON/OFF setting. Pressing the [VOICE] button lets you listen to the Drum Kit Voice while editing. * Once a setting is changed, "*" will appear on the display next to "KIT". After data is stored, the mark will disappear. KIT*IN=pad 1 V=1 =K/019 MapleA20 6. To store your changes in a User Drum Kit, use the Store Operation described below. * The changes you made will be lost if another drum kit is selected before your changes have been stored. 6-1. Press the [SAVE/ENT] button. The following display will appear. Store Drumkit To= 49 Init Kit 6-2. Use the [VALUE-]/[VALUE+] buttons to assign the Drum Kit number (49-80) (located next to "To="). The number and drum kit name will appear. 6-3. Press the [SAVE/ENT] button, the following display will appear asking for confirmation before the store operation is carried out. Store KIT to= 49 Are you sure ? 6-4. Press the [SAVE/ENT] or [VALUE+] button, the store operation will be carried out. * Press the [VALUE-] button to cancel the store operation. The following display will appear after the store operation is complete. Complete ! 15