Yamaha DTXPRESS Reference Guide - Page 25
Latiniq, CopySONG, Quantize, Value=ƒ
View all Yamaha DTXPRESS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
3. Volume, Pan This function changes the volume and pan settings for each MIDI channel in the user song (rewrites the Voice information in the song's header). This control change will be transmitted when a song is selected and when song playback is stopped. qw SONG Ch 1=off Vol= --- Pan=--- e r q MIDI Channel [Range] Ch1-Ch16 w Control Change transmit On/Off on: Transmits. off: Does not transmit. e Vol (Volume) [Range] 0-127 r Pan [Range] 0-127 4. Song Copy This function copies the assigned song q to the user song that is currently selected. SONG Copy from= 1Latiniq q When the Song Copy operation is carried out, all data in the User Song that is currently selected will be replaced with data of the copy source. q from (Copy Source) [Range] 1-127 Sets the song that is the copy source. The song number and name will be displayed. A preset song or a user song can be assigned. Procedure 1. Assign the Copy Source Song on the display shown above, press the [SAVE/ENT] button. The following display will appear asking for confirmation before the copy operation is carried out. CopySONG From 1 Are you sure ? 2. Press the [SAVE/ENT] or [VALUE+] button, the copy operation will be carried out. Song Job Mode * Press the [VALUE-] button to cancel the copy operation. * During song playback, the copy operation cannot be carried out. "ERROR SEQ is Running" will appear. Stop the song and try the copy operation again. * If memory is insufficient when in the copy operation, "ERROR Memory Full" will appear. Clear any unnecessary user songs and try the copy operation again. When the copy operation is complete, "Complete!" will appear. 5. Quantize This function quantizes each track q of the user song to the accuracy w defined here. quantize: When the timing of the sequence data that was recorded is inaccurate, this function is used to correct the timing. The accuracy for correcting can be assigned using note lengths. SONG Quantize TR=1 Value=ƒ q w When the Quantize operation is carried out, all data in the assigned track of the currently selected user song will be replaced. q TR (Specified Track) Assigns the track ("1" or "2") to be quantized. w Value (Quantize Accuracy) [Range] ƒ quarter note, ƒ3 quarter note (triplet), © eighth note, ©3 eighth note (triplet), ˙ sixteenth note, ˙3 sixteenth note (triplet) Procedure 1. Set the track and the quantize accuracy on the display shown above, press the [SAVE/ENT] button. The following display will appear asking for confirmation before the quantize operation is carried out. Quantize Tri ƒ Are you sure ? 2. Press the [SAVE/ENT] or [VALUE+] button, the quantize operation will be carried out. * Press the [VALUE-] button to cancel the quantize operation. * During song playback, the quantize operation cannot be car- ried out. "ERROR SEQ is Running" will appear. Stop the song and try the quantize operation again. * If memory is insufficient when in the quantize operation, "ERROR Memory Full" will appear. Clear any unnecessary user songs and try the quantize operation again. When the quantize operation is complete, "Complete!" will appear. 25