Yamaha DTXPRESS Reference Guide - Page 23

5. Drum Kit Common Parameters This function sets the common settings for the entire drum kit. The Drum Kit Common Parameters are divided into the following 5 pages. 5-1. Volume 23 5-2. Drum Reverb Send 23 5-3. Hi-Hat Sensitivity 23 5-4. Song Select 23 5-5. Drum Kit Name 23 5-1. Volume Sets the overall volume for the drum voice. KIT Common Volume= 127 q q Volume [Range] 0-127 5-2. Drum Reverb Send Sets the overall reverb send level of the drum voice. KIT Common DrumRevSend 40 q q DrumRevSend (Drum Reverb Send Level) [Range] 0-127 The actual reverb send level will be determined by multiplying the reverb send level set in [2-2. Reverb Send] (P. 19) with the value set here. 5-3. Hi-Hat Sensitivity Sets the foot controller sensitivity connected to HI-HAT CONTROL jack on the rear panel. KIT Common HH Sensitivty=32 q q HH Sensitivty [Range] 0-63 Larger values provide higher sensitivity. Drum Kit Voice Edit Mode 5-4. Song Select This parameter allows you to switch the main song q at the same time the drum kit is switched. KIT Common SongSel=110ƒ=120 q w q Song Select (Song Number) [Range] -, 1-127 Assign the song number to select the song for playback. The song will not be switched if the setting is set to "---". w q (Tempo) [Range] -, 30-300 Assign the tempo that will be used. If "---" is set, the tempo will not change . 5-5. Drum Kit Name Changes the drum kit name that is currently selected for editing. KIT Common KitName=Acoustic q q KitName (Drum Kit Name) Procedure 1. In the display shown above, use the [SEL] but- tons to move the cursor to the character you want to change. 2. Use the [VALUE-]/[VALUE+] buttons to select the alphabet, number or symbol. 3. Repeat steps 1 and 2 above to create the Drum Kit Name using a maximum of 8 characters. ● The available characters to choose from are (in order): space 0123456789:;?@ ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_` abcdefghijklmnopqrstuvwxyz{|}ßå 23