Yamaha DVD-C900GL DVD-C900GL Manual - Page 17
For Custom Installer, Connecting to a stereo amplifier that has neither 6 channel audio signal
View all Yamaha DVD-C900GL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
English Connections Ⅵ Connecting to a stereo amplifier that has neither 6 channel audio signal input terminals nor Dolby Digital decoder Connect this unit's MIXED 2CH AUDIO OUT terminals to the amplifier's audio signal input terminal printed as "DVD", "VIDEO", "AUX", etc. 6 channel audio signals encoded with Dolby Digital are mixed down into 2 channels and output from the MIXED 2CH AUDIO OUT terminals. Refer to pages 14-15 for VIDEO OUT terminal connections. DIGITAL PCM/ DIGITAL MPEG/DTS VIDEO OUT SELECT VIDEO/ COMPONENT S VIDEO VIDEO OUT COAXIAL OPTICAL AUDIO OUT MIXED 2CH VIDEO 1 S VIDEO COMPONENT VIDEO Y PB PR 2 1 VIDEO OUT Connection cord (included) Refer to pages 14-15 for VIDEO OUT terminal connections. This unit (U.S.A. model) OUT IN REMOTE CONTROL DVD Amplifier Note If you have no stereo amplifier available, you can connect this unit's MIXED 2CH AUDIO OUT terminals to your TV's audio signal input terminals (if your TV is equipped with RCA type audio signal input terminals). For Custom Installer For U.S.A. model only REMOTE CONTROL (IN, OUT) terminals These terminals are used for custom installation system. When this unit is connected to the components for custom installation system, you can operate this unit with the system remote control. Connect the REMOTE CONTROL IN terminal of this unit to the output terminal of the central controller for custom installation system. By connecting the REMOTE CONTROL OUT terminal of this unit to the REMOTE CONTROL IN terminal of the other component, you can also operate it with the system remote control. In this way, up to 6 components can be connected in series. OUT IN REMOTE CONTROL 13