Yamaha DVD-C900GL DVD-C900GL Manual - Page 69
For DVDs only, For Video CDs only, Use Digital Output on the SET UP menu
View all Yamaha DVD-C900GL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
English Appendix For DVDs only Problem The screen type (4:3 or 16:9) does not match your TV monitor. Audio sound track and/or subtitle language is not the one selected on the SET UP menu. No subtitles. Angle cannot be changed. Playback is not possible. Picture is lightened and darkened alternately. No sound when digital signals from this unit is selected as the input source on the amplifier (or receiver). A loud hissing noise is heard when playing back a disc encoded with DTS. A loud hissing noise is heard when playing back a disc encoded with MPEG. No sound when playing back a disc encoded with DTS. Cause The setting of "TV Type" on the SET UP menu is not proper. If the audio sound track and/or subtitle language you selected does not exist on the disc, the priority language on the disc is used. The disc does not have subtitles. The display of subtitles is turned off. The scene (or the entire disc) currently played back has only one angle of view. The rating level you set is lower than the level of the disc. A disc recoded with copyright protection is played back when this unit is connected to the TV by way of a video cassette recorder. The setting of "Digital Output" on the SET UP menu is not suitable for the digital terminal connections between this unit and the amplifier (or receiver). This unit is not connected to a DTS decoder or an amplifier (or receiver) equipped with a DTS decoder. This unit is not connected to a MPEG decoder or an amplifier (or receiver) equipped with a MPEG decoder. Only analog terminal connections are made between this unit and the amplifier (or receiver). What to Do Make a proper setting on "TV Type". (See page 45.) Press the SUBTITLE OFF/ON button to turn on the display of subtitles. Change the setting of "Rating Level" on the SET UP menu to a higher level. (See pages 50 to 51.) Connect this unit to the TV directly or by way of an AV amplifier (or receiver). Change the setting of "Digital Output" on the SET UP menu to the suitable setting. (See page 59.) Use "Digital Output" on the SET UP menu to select the "OFF" mode for "DTS". Use "Digital Output" on the SET UP menu to select the "PCM" mode for "MPEG". No sound signals are output from the analog audio signal output terminals of this unit when playing back a disc encoded with DTS. For Video CDs only Problem No menu appears. Cause The setting of "Playback Control" on the SET UP menu is set to "OFF". The disc does not have a playback control function. What to Do Change the setting of "Playback Control" on the SET UP menu to "ON". (See page 52.) 65