Yamaha DVD-C900GL DVD-C900GL Manual - Page 63

English 1, 2, 3 DISC SKIP OPEN/ DISC MODE TIME CLOSE CANCEL S/F REPEAT A-B RANDOM PROG 1 2 3 4 5 6 7 8 9 0 +10 ANGLE RETURN TITLE/INDEX TITLE SELECT AUDIO MENU MULTI SPEED SUBTITLE SET UP SKIP/SEARCH OFF/ON ON SCREEN STOP STILL/PAUSE PLAY Initial settings (on the SET UP menu) Audio Settings The items in this group control audio signals output from the AUDIO OUT terminals on the rear of this unit. Note: The item No. 2 "Dynamic Range Control" and No. 3 "Speaker" are available for China and General models only. 1 Digital Output On this item, you can select the format of digital signal to be output from the OPTICAL and COAXIAL DIGITAL output terminals of this unit for respective formats recorded on DVD discs. Depending on the format of digital signal, you can make this unit convert the disc's original format of digital signal into PCM (48 kHz) format for outputting signals, or you can make this unit output no signal from the OPTICAL and COAXIAL DIGITAL output terminals of this unit. 1 When the SET UP group "Audio Settings" is selected, press or to select "1 Digital Output", and then press SELECT. Audio Settings DVD VCD Display Audio 1 Digital Output 2 Press or to select the format of digital signal for which you will change the current setting, and then press SELECT. Audio Settings 1 96kHz LPCM 2 Dolby Digital 3 DTS 4 MPEG Digital Output 48kHz PCM Disc Original Disc Original PCM 3 Press or to select the preferred mode, and then press SELECT. Audio Settings 1 48kHz PCM 2 OFF 96kHz LPCM Note The settings on this item are only applicable when playing back a DVD. 59