Yamaha DVD-C900GL DVD-C900GL Manual - Page 19

English Connections MODE SELECT (PAL/NTSC) switch This unit is designed for use with the NTSC and PAL television formats. Set this switch to the position for the format your TV monitor employs. PAL: Set to this position if your TV monitor employs the PAL format. NTSC: Set to this position if your TV monitor employs the NTSC format. EO S VIDEO MODE SELECT PAL NTSC Y PB PR COMPONENT VIDEO VIDEO OUT Notes • Be sure to change the setting of this switch only when this unit is turned off or the power cord of this unit is disconnected from the AC outlet. • If "6 Signal System Conversion" on the SET UP menu is set to "Disc", the setting of this switch becomes ineffective when a DVD or Video CD disc is played back. The format employed on the disc currently played back is automatically selected. Ⅵ Connecting to a TV equipped with component video input terminals You can connect this unit's COMPONENT VIDEO OUT terminals to your TV or projector, if your TV or projector has component video signal input terminals. The COMPONENT VIDEO OUT terminals output three types of chrominance signals separately. By this connection, you can enjoy high quality pictures with vivid colors. If you make this connection, be sure to set the VIDEO OUT SELECT switch to the "COMPONENT VIDEO OUT" position. Note Do not connect this unit's COMPONENT VIDEO OUT terminals to component video input terminals special for HD (High-Definition) TV. Refer to pages 10-13 for AUDIO OUT terminal connections. This unit (U.S.A. model) DIGITAL PCM/ DIGITAL MPEG/DTS VIDEO OUT SELECT VIDEO/ COMPONENT S VIDEO VIDEO OUT COAXIAL OPTICAL AUDIO OUT MIXED 2CH VIDEO 1 S VIDEO COMPONENT VIDEO Y PB PR 2 1 VIDEO OUT VIDEO OUT SELECT VIDEO/ COMPONENT S VIDEO VIDEO OUT Video connection cords (not included) Y PB PR TV monitor 15