Yamaha DVD-C900GL DVD-C900GL Manual - Page 18

Video connections, Connecting to an amplifier equipped with an RCA type video signal input

Page 18 highlights

Connections Video connections Ⅵ Connecting to an amplifier equipped with an RCA type video signal input terminal (including an S-video input terminal) Connect this unit's VIDEO 1 (or 2) terminal to the amplifier's RCA type video signal input terminal (labeled "DVD/LD" etc.). If your amplifier has an S-video input terminal, you can connect this unit's S VIDEO terminal to the amplifier's S-video input terminal by using a commercially available S-connector cable. When the connection is made in one of these ways, be sure to set the VIDEO OUT SELECT switch to the "VIDEO/S VIDEO" side. This unit has two VIDEO terminals. The other terminal can be connected to another amplifier or TV. TV monitor VIDEO IN S-VIDEO IN VIDEO OUT SELECT VIDEO/ COMPONENT S VIDEO VIDEO OUT Refer to pages 10-13 for AUDIO OUT terminal connections. or VIDEO S VIDEO MONITOR MONITOR OUT OUT Amplifier VIDEO IN S VIDEO IN Refer to pages 10-13 for AUDIO OUT terminal connections. DIGITAL PCM/ DIGITAL MPEG/DTS VIDEO OUT SELECT VIDEO/ COMPONENT S VIDEO VIDEO OUT Connection cord (included) COAXIAL OPTICAL AUDIO OUT MIXED 2CH VIDEO 1 S VIDEO COMPONENT VIDEO Y PB PR S-video cable (not included) 2 1 VIDEO OUT This unit (U.S.A. model) TV monitor Connection cord (not included) VIDEO IN Notes ● If your TV has an RCA type video signal input terminal (including an S-video input terminal), this unit can be connected to the TV directly. ● Do not connect this unit to the TV through a video cassette recorder. Otherwise, the picture may not be played back normally with some DVDs. This is because the copyright protection circuit built-in this unit operates. • Be sure to change the setting of the VIDEO OUT SELECT switch only when this unit is turned off or the power cord of this unit is disconnected from the AC outlet. 14 S VIDEO terminal This unit provides you with a S VIDEO terminal in addition to standard type VIDEO terminals. The S VIDEO terminal transmits video signals separated into luminance (Y) signals and color (C) signals. High quality pictures are obtained from this terminal. In comparison with the S VIDEO terminal, standard type VIDEO terminals transmit "composite" video signals.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74

14
Connections
Video connections
m
Connecting to an amplifier equipped with an RCA type video signal input
terminal (including an S-video input terminal)
Connect this unit’s VIDEO 1 (or 2) terminal to the amplifier’s RCA type video signal input terminal (labeled “DVD/LD” etc.).
If your amplifier has an S-video input terminal, you can connect this unit’s S VIDEO terminal to the amplifier’s S-video input terminal
by using a commercially available S-connector cable.
When the connection is made in one of these ways,
be sure to set the VIDEO OUT SELECT switch to the “VIDEO/S VIDEO”
side
.
This unit has two VIDEO terminals. The other terminal can be connected to another amplifier or TV.
Notes
If your TV has an RCA type video signal input terminal
(including an S-video input terminal), this unit can be
connected to the TV directly.
Do not connect this unit to the TV through a video cassette
recorder. Otherwise, the picture may not be played back
normally with some DVDs. This is because the copyright
protection circuit built-in this unit operates.
Be sure to change the setting of the VIDEO OUT
SELECT switch only when this unit is turned off or the
power cord of this unit is disconnected from the AC
outlet.
S VIDEO terminal
This unit provides you with a S VIDEO terminal in addition to
standard type VIDEO terminals.
The S VIDEO terminal transmits video signals separated into
luminance (Y) signals and color (C) signals. High quality
pictures are obtained from this terminal. In comparison with
the S VIDEO terminal, standard type VIDEO terminals
transmit “composite” video signals.
1
MIXED 2CH
VIDEO
COMPONENT VIDEO
S VIDEO
Y
P
B
P
R
1
2
DIGITAL
VIDEO OUT SELECT
VIDEO/
S VIDEO
COMPONENT
VIDEO OUT
MPEG
/
DTS
COAXIAL
OPTICAL
PCM
/
DIGITAL
AUDIO OUT
VIDEO OUT
VIDEO IN
VIDEO IN
S-VIDEO IN
S VIDEO
MONITOR
OUT
VIDEO
MONITOR
OUT
VIDEO IN
S VIDEO IN
VIDEO OUT SELECT
VIDEO/
S VIDEO
COMPONENT
VIDEO OUT
or
S-video cable (not included)
TV monitor
Amplifier
TV monitor
Refer to pages 10-13
for AUDIO OUT
terminal connections.
Refer to pages 10-13
for AUDIO OUT
terminal connections.
This unit (U.S.A. model)
Connection cord
(not included)
Connection cord (included)