Yamaha LS9-32 Ls9 Editor Owner's Manual - Page 3
Mixer Setup, Mix Bus Setup
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
❏ Mixer Setup To open the Mixer Setup window, choose [Mixer Setup] from the [File] menu. 1 2 3 A ModelSelect Here you can specify the model of LS9 console. This is set automatically when the Editor synchronizes with the LS9 console. B Mix Bus Setup Here you can make settings relating to the MIX buses. Signal Type: This specifies whether each two adjacent odd-numbered/even-numbered MIX buses will be used as MONO x2 or STEREO. Bus Type/Pre Fader Send Point: Specifies whether the Send Point of each two adjacent odd-numbered/ even-numbered MIX buses will be VARI (PRE EQ), VARI (PRE FADER), or FIXED. Pan Link: This is valid only when the Signal Type is STEREO and the BUS TYPE is VARI; when enabled, the PAN setting sent to the stereo MIX bus will be linked with the PAN to the STEREO bus. C Matrix Bus Setup Here you can make settings relating to the MATRIX buses. Signal Type: This specifies whether each two adjacent odd-numbered/even-numbered MATRIX buses will be used as MONO x2 or STEREO. 3 LS9 Editor Owner's Manual