Yamaha LS9-32 Ls9 Editor Owner's Manual - Page 55

34 56 CInput patch Click the CHANNEL field, and choose one of the following as the signal route that will be patched to the input channel(s) of the currently selected GEQ module. This is linked with 5 Output Patch NONE No assignment MIX1-16(*) MIX channel 1-16 MATRIX1--8(*) MATRIX channel 1-8 ST L, ST R, MONO(C)(*) STEREO channel L/R, MONO channel INS CH 1-32 INPUT CH 1-32 insert out INS MIX 1-16 MIX channel 1-16 insert out INS MATRIX1-8 MATRIX channel 1-8 insert out INS ST L, INS ST R, INS MONO(C) Insert-out of STEREO channel L/R or the MONO channel (*) Displayed only, and cannot be selected. The channel name is shown in the boxes immediately below. D Input meter This indicates the level of the signal that is being input to the currently selected GEQ module. E Output patch Click the CHANNEL field, and choose one of the following as the signal route that will be patched to the output channel(s) of the currently selected GEQ module. This is linked with 3 Input Patch. NONE No assignment IN CH 1-64(*1)(*2) INPUT jacks 1-64(*1) STIN1L-STIN4R(*2) L/R channels of ST IN jacks 1-4 INS CH 1-32 INPUTCH 1-32 insert in INS MIX 1-16 MIX channel 1-16 insert in MATRIX INSERT1-8 MATRIX channel 1-8 insert in INS ST L, INS ST R, INS MONO(C) Insert-in of STEREO channel L/R or the MONO channel (*1) INPUT CH 33-64 can be displayed only if you're editing offline and have selected LS9-32 in the Model Select field of the Mixer Setup window, or if you are editing online with the LS9-32 connected. (*2) Displayed only, and cannot be selected. The channel name is shown in the boxes immediately below. F Output meter This indicates the level of the signal that is being output to the currently selected GEQ module. 55 LS9 Editor Owner's Manual