Yamaha MD8 Owner's Manual - Page 22
Ginsert I/o Hmic/line Inputs 1 & 2 Imonitor Out Jstereo Out K2tr In Ltrack Direct Outs - minidisc
View all Yamaha MD8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
14 Touring the MD8 G INSERT I/O These TRS phone jacks are used to connect signal processors for use with input channel 1 and input channel 2 exclusively. Typically, compressors, limiters, and noise gates are connected to this type of connection. 1/4" phone plug Tip (send) Tip (send) Ring (return) 1/4" TRS phone plug To processor's input Sleeve (ground) Sleeve (ground) Connect to INSERT I/O jack 1/4" phone plug Tip (return) From processor's output Sleeve (ground) H MIC/LINE INPUTs 1 & 2 These inputs are used to connect balanced condenser microphones and balanced line-level signal sources to the MD8 (unbalanced sources can also be connected). Each input features a XLR-type connector and TRS phone jack connector. Phantom power is available on the XLR-type connector for use with condenser microphones. If you're not using condenser microphones with these inputs, keep the PHANTOM POWER ON/OFF switch set to OFF. Male XLR plug 1 (ground) 3 (cold) 1/4" TRS phone plug Tip (hot) Ring (cold) 2 (hot) I MONITOR OUT These phono jacks are used to send the monitor signals to a stereo monitor amplifier and speakers. This could be a dedicated monitor amplifier and speakers or your hi-fi system. Connect them to the monitor amplifier's stereo inputs. The MONITOR OUT signal is the same as the headphone signal. J STEREO OUT These phono jacks are used to connect a stereo master recorder for recording the final mix. The master recorder could be a DAT deck, MiniDisc deck, or cassette tape deck. Connect them to your master recorder's stereo inputs. K 2TR IN These phono jacks are used to connect the outputs of a stereo master recorder to the MD8. The master recorder could be a DAT deck, MiniDisc deck, or cassette tape deck. Connect them to your master recorder's stereo outputs. To monitor the output of the stereo master recorder during mixdown, press the 2TR IN MONITOR SELECT switch. L TRACK DIRECT OUTs These phono jacks are used to send the track signals to another mixer. This is useful when you use the MD8 in conjunction with a larger mixer. Connect them to the line inputs on the other mixer. With no disc loaded, the DIRECT OUTs 1-4 output the signals of Groups 1-4. Sleeve (ground) Phono plug Tip Sleeve Phono plug Tip Sleeve Phono plug Tip Sleeve Phono plug Tip Sleeve MD8-Owner's Manual