Yamaha MD8 Owner's Manual - Page 48
Setting the Pre-Roll & Post-Roll Times
View all Yamaha MD8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
40 Recording & Mixing Techniques Setting the Pre-Roll & Post-Roll Times Pre-Roll and Post-Roll are used in conjunction with the Auto Punch In/Out function. Pre-Roll refers to the time before the IN point at which playback starts. Post-Roll refers to the time after the OUT point at which playback stops. The default time for both Pre-Roll and Post-Roll is 5 seconds. You can change the values independently using the PrePost Roll function, as explained below. These settings are stored when MD8 is turned off. Pre-Roll Point Pre-Roll Time Post-Roll Point Post-Roll Time [IN] [OUT] 1. Press the [UTILITY] button and use the DATA dial to select the PrePost Roll function. 2. Press the [ENTER] button. The display shows Pre 5sec . 3. Use the DATA dial to set the Pre-Roll time from 0 to 9 seconds. 4. Press the [ENTER] button. The display shows Post 5sec . 5. Use the DATA dial to set the Post-Roll time from 0 to 9 seconds. 6. Press the [ENTER] button. 7. Press the [UTILITY] or [EXIT] button to leave the Utility mode. MD8-Owner's Manual