Yamaha MD8 Owner's Manual - Page 62
Adjusting Markers, Press the [ADJUST] button.
View all Yamaha MD8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
54 Quick Search Functions Adjusting Markers Once inserted, markers can be finely adjusted in one-frame steps. This also applies to the LAST REC IN and OUT points (they double as Punch In and Out points). The Start and End markers cannot be adjusted. 1. Press the [ADJUST] button. The display shows MARK X: ADJST ("X" being the number of the Marker whose number is flashing on the display at the time when you press [ADJUST]). 2. Use the DATA dial to select the marker that you want to adjust. IN and OUT refer to the LAST REC IN and OUT points. 3. Press the [ENTER] button. The display shows ADJSTLoad. and about ten seconds of sound data (about five seconds on either side) of the marker is loaded into memory for quick playback. When loading is complete, the sound data can be played from about 1.5 seconds before the marker to about 1.5 seconds after the marker, as shown below. 1.5 sec 1.5 sec Audition [1] 10 seconds of sound data loaded into memory The 1.5 seconds of sound data before the marker is played at a lower volume level, so you can hear exactly where the marker occurs. To play the first 1.5 seconds at normal volume and the remaining sound data at a lower level, turn the CURSOR shuttle to the left. You can toggle between these two playback modes by turning the CURSOR shuttle to the left, or right. Each time you do so the sound data is played. Playback Volume Marker Position Marker Position MD8-Owner's Manual