Yamaha MD8 Owner's Manual - Page 57
Applying Effects when Recording, Applying Effects with PingPong
View all Yamaha MD8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Applying Effects when Recording 49 Applying Effects when Recording 1. To send an input channel signal to an effects processor, set the [FLIP] switch to the up position, the fader to the 7-8 mark, and turn up an AUX control. The input channel signal is sent to the effects processor. 2. Use the GROUP ASSIGN switches to assign the input channel signal to a group. The input channel signal is sent to the specified group. 3. Set the effects processor as required. 4. To send the processed signal to the track, press the [9-10] or [11-12] GROUP ASSIGN switch corresponding to the GROUP ASSIGN switch pressed in Step 2, and then turn up the 9-10 or 11-12 level control. Use the 9-10 or 11-12 level control to balance the processed signal with the unprocessed signal that is coming directly from the input channel. Use the input channel fader to adjust the level of the unprocessed signal. Press MONITOR SELECT [GROUP 1-3] or [GROUP 2-4] to monitor both signals. 5. Hold down [GROUP] while pressing the REC SELECT switch that corresponds to the track you want to record to. With the balance set, you're ready to record. Applying Effects with Ping-Pong 1. To send an input channel signal to an effects processor, set the [FLIP] switch to the up position, the fader to the 7-8 mark, and turn up an AUX control. The input channel signal is sent to the effects processor. 2. Use the GROUP ASSIGN switches to assign the input channel signal to the destination group. The input channel signal is sent to the destination group. 3. Set the effects processor as required. 4. To send the processed signal to the track, press the [9-10] or [11-12] GROUP ASSIGN switch corresponding to the GROUP ASSIGN switch pressed in Step 2, and then turn up the 9-10 or 11-12 level control. Use the 9-10 or 11-12 level control to balance the processed signal with the unprocessed signal that is coming directly from the input channel. Use the input channel fader to adjust the level of the unprocessed signal. Press MONITOR SELECT [GROUP 1-3] or [GROUP 2-4] to monitor both signals. With the balance set, you're ready to perform the ping-pong operation. MD8-Owner's Manual